Showing posts with label Pro Bikes. Show all posts
Showing posts with label Pro Bikes. Show all posts

2010-03-08

Stybar's Ride

So you think Cyclocross Magazine had the inside scoop on Stybar's new whip? Well, here's another look at his bike.

There's no mistaking who's tent this is.


And the new decor added to his camper.


And matching bike:


Here's a look at his two bikes during the break after the Espoirs race. He has Pipistrello 34s on the bike now, but would later switch to 32's for the race. Also, it seems as though Stybar has a favorite saddle too. The San Marco on the new Rainbow bike looks to have considerable wear.


Stybar had the Avid Shorty Ultimates on his bike. The Pipistrellos are also the "older" model with the large side knobs. These features were removed for the 2009 model, but the pros seem to favor the grippier tread of the previous generation.


A close up of the PMP hub. Even though Stybar is a Sram sponsored rider, he choses to use a Sram 1070 cassette instead of the Red model like many of the top domestic pros.


A view of Stybar's cockpit. Sram Red shifters decked out in a full white setup, on anatomic drop handlebars. Notice the slight bulge of the cable pushing out the bartape slightly.


The stockpile of wheel bags leaning against the trailer.


Each bag is labeled so the mechanic can figure out which wheels are in the bag, without having to open up each one. This one is the 34 Pipistrellos that we saw earlier on Stybar's bike.


A front view of the bike Stybar raced. Check out the fully integrated handlebar/stem setup and the low profile carbon hoops. I'm surprised that Stybar chose to race on these wheels (compared to the deeper profile ones) considering how sandy the course in Lille was. I do love the Czech inspired spoke pattern.


View from the rear.


Another view from the rear. All of the top riders are interviewed before the race. Cyclocross is a big deal in Belgium.


The man and the machine.


Stybar throwing down during the race, seen here on the B bike.


Stybar went on to finish second to Nys in a two-up sprint. Stybar would go on to finish second again in Ostmalle at the last GVA race of the season to Bart Wellens. He would also finish second to Nys in the series overall standings. Not a bad season though; several high profile wins including the Superprestige overall and World Championship title. I bet he earned one of these. That's right, Stybie cakes!

2009-11-18

It's All About the Details

There are several levels to being PRO. It's one thing to align the tire label with the valve stem, but it's an entirely different thing for your entire bike to match, functionally and cosmetically. No, I'm not talking about hipsters on fixed gears with Velocity Deep V rims or Aerospoke wheels. I'm talking about Mo Bruno Roy's custom Seven Mudhoney SLX, prepped by her husband and mechanic, Matt Roy. Check them out at mmracing.org.

The first thing that pops out at me is how all of the colors are coordinated together perfectly. The blue on the Seven logos match the bar tape. Not only are white hoods sparkly clean, the handlebar tape is finished with white electrical tape too. The white accents on the Sram Force shifters and cranks don't hurt either.

Mo's choses a Fizik Vitesse HP saddle, in matching blue of course. The black and blue combination of the saddle compliment the blue Seven logo on the carbon downtube. You can also see just how good the white hoods, blue bar tape and white electrical tape looks.


Now this image here highlights all of Matt's attention to detail. Take a look at the custom blue anodized bolts holding down the TRP Euro-X carbon brakes. The cables are also all capped off with blue cable ends. At the top of the cable hanger, sits a rubber boot to help seal the brakes against any mud, dirt or grime.


Mo currently holds the Verge leader's jersey and is having a fantastic season with five wins and eleven podiums so far. Not only is she fast, she and her husband are some of the nicest folks you'll meet at a bike race. So give her a shout and show her your support as she tears around the race course.

2009-11-09

Adam Craig's Giant Prototype

You've seen it all before already. Giant is in the process of testing and developing a carbon cyclocross bike. I was able to take a closer look at this bike in the pit at the Cycle-Smart International Cyclocross race in Northampton, MA.

On day 1, after starting in the last row and being stuck behind a crash, Adam was able to make it up to the front of the race and finished 5th. On day 2, Adam suffered another bout of bad luck as another crash at the start of the race slowed down half the field. Craig was on the ground for several minutes before getting up and continuing the race. He took a bike change on the first lap and finished the race the current TCX aluminum production model to 9th place.

Adam's legs and the aluminum Giant during post race interview. Note the MRP guide with a single chain ring setup.

While leap frogging the field in the elite race, the carbon Giant sat in the pit in case misfortune were to strike again. The bike is complete with Shimano's latest electronic Di2 Dura Ace 7970 gruppo along with several other PRO selections.

A closeup of the stem on Adam's bike.
This stem is very similar to the stem on Mark Cavendish's bike from the Tour. This one has a hole drilled right through the middle to make way for the front brake cable. If you take a closer look, there's no cable hanger attached to the head set.

Craig uses TRP Euro-X Carbon brakes to scrub speed. Take a look at Adam's straddle cable height, relative to the setup on Jeremy Power's CX9 or Katie Compton's Stevens Cross Carbon Team. You can see why this is important over here.
Craig is also rolling on Shimano Dura-Ace 24mm carbon tubular rims. The front tire is a Michelin Mud tread glued onto to a 30mm Dugast casing.

A close up of the electronic Dura Ace shifter.

The bottom bracket junction on the carbon prototype.

Shimano 7900 crankset mated to a custom 46 tooth Dura Ace chainring.

The battery pack at the heart of the Di2 system. It looks like the mount is bolted to the underside of the chain stay, with the battery pack sliding right on. I wonder if there's a chance that this could get knocked off during a crowded run up?

On his first lap mishap, Craig seems to have suffered a rear tire casualty. Here's a closer look at the tire that was originally on his A bike. This tread looks like Vittoria's new XM tread.

A look of the rear triangle. Take a look at Craig's rear tire, mounted to a Dura Ace 24 mm clincher wheel. He choses to run a Michelin Jet as a backup to the Vittoria. The most interesting thing about this tire is the way it's mounted. Michelin features arrows on their sidewalls for a front and rear specific rolling direction. Many chose to run the rear tire in reverse, with the REAR arrow pointing forward. Craig on the other hand decides to run the tire with the FRONT arrow point, and the same direction as a front tire would be mounted.

Another view of the rear triangle and brake caliper. I don't fully understand the reasoning behind the small rear triangle. Initial reports say that Giant was aiming to design a compliant bike, instead of focusing on stiffness. My thought is that the smaller rear triangles and shorter tubes would result in a stiffer ride. An independent bike testing consultant told me that the smallest "bendy" bike, is still stiffer than the largest stiffest bike out there.

Check out the detail on the machined ramp feature on the one off Dura Ace chainring. The plates on the chain also have excess material removed to reduce wait, saving 18 grams over the older 7800 incarnation.

Good luck the rest of the season Adam. I'll be rooting for you at Nationals.

2009-11-01

What the pros ride

Let's take a moment and look at the bike of Luna sponsored rider Katerina Nash.



Katerina is off to a blazing start right now, taking the win both days in Providence and being the only rider who can answer to the speed and power of Katie Compton. With the 2010 Cyclocross World Championships in her backyard in Tabor, CZE, Katerina has a lot on the line this season. She rides for Team Luna, a perennial powerhouse on the domestic and international cycling circuit. With riders like Georgia Gould, Catherine Prendal and the newly un-retired Alison Dunlap, the Luna team brings the estrogen and horsepower to any bike race. The team is sponsored by Luna, Orbea, Maxxis, Mavic and Shimano among others. Now let's take a glance at her equipment choice.

Upon first glance, all the component choices match up.
Frame: Orbea
Drivetrain: Shimano 7800
Wheels: Mavic Cosmic Carbone Ultimate Tubulars
Tires: Maxxis....wait, Maxxis doesn't make any tubular tires.

Well, that's okay. Maybe the tires are Maxxis treads glued onto a FMB or Dugast casing. Maxxis did release a new tread called the Mud Wrestler at Interbike this year, maybe she's doing some real world testing. All plausible scenarios.

But when we take a closer look, it seems as this tread doesn't quite match the one on the MW, or any other Maxxis tire.



If my eyes don't deceive me, they look more like Dugast Rhinos with black sidewalls. If you look closely, you'll see the unmistakable arrows on the side knobs of these tires. Katerina rides Dugast tires even though her team is sponsored by Maxxis...gasp!!

2009-10-28

Memories from PVD

Pictures from Day 2 of the Providence Cyclocross Festival


Mo Bruno Roy's (MM Racing Presented by Seven Cycles) Seven Mudhoney SLX


Dugast Typhoon Tires


Jamey Driscoll (Cannondale/Cyclocrossworld.com) remounts after the barrier


Meredith Miller (Cal Giant) drilling it on the flats


Kate Scheider (Mafia Racing) gracing New England with her presence all the way from CO